← Back to DiTec Products

Teak Clean

Safety Data Sheet  |  Product Code: 4X-PPJ8-7BEW  |  Cleaning / Washing Agent

Section 1 — Identification

Manufacturer: Ditec Marine Products, LLC
W229 N2512 Duplainville Road, Waukesha, WI 53186 USA
Tel: 1-800-572-4390

Product Use: Cleaning/Washing Agent

Emergency Phone: CHEMTREC — Canada and USA: (800) 424-9300 | Acct: 1018960

Section 2 — Hazard(s) Identification

This product is not classified as hazardous under GHS/CLP regulations. No GHS hazard symbols, signal word, or hazard statements are assigned.

Section 3 — Composition / Information on Ingredients

Chemical Name / CAS No.% Weight
Trade Secret (Proprietary Active Ingredient)70% – 80%
Water (CAS 7732-18-5)20% – 30%

Section 4 — First-Aid Measures

Inhalation: Remove from exposure area. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.

Eye Contact: Flush eyes with water for a minimum of 15 minutes, occasionally lifting upper and lower lids. Get medical attention promptly.

Skin Contact: Remove contaminated clothing. Wash skin with soap and water. Get medical attention. Wash clothing before reuse.

Ingestion: Do NOT induce vomiting. Give victim a glass of water. Call a physician or poison control center immediately.

Section 5 — Fire-Fighting Measures

Extinguishing Media: Use media suitable for the surrounding fire.

Specific Hazards: None known.

Firefighter PPE: Self-contained breathing apparatus (MSHA/NIOSH approved) and full protective gear.

Section 6 — Accidental Release Measures

Stop leak if without risk. Move containers from spill area. Approach from upwind. Prevent entry into sewers, water courses, basements or confined areas. Contain and collect with non-combustible absorbent material (sand, earth, vermiculite, or diatomaceous earth). Place in container and dispose per local regulations via a licensed waste disposal contractor.

Section 7 — Handling and Storage

Handling: Use with adequate ventilation. Avoid breathing dusts, mists, and vapours. Do not get in eyes, on skin, or on clothing. Wear eye protection and protective clothing. Wash thoroughly after handling.

Storage: Store in a cool, dry, well-ventilated place. Keep container closed when not in use.

Section 8 — Exposure Control / Personal Protection

Engineering Controls: Provide ventilation sufficient to maintain exposure below recommended limits.

Respiratory: Program meeting OSHA 1910.134 and ANSI Z88.2 requirements when conditions warrant.

Skin Protection: Wear impervious protective gloves and protective gear as needed.

Eye Protection: Safety glasses with side shields (or goggles) and a face shield.

Other: Facility should be equipped with an eyewash facility and safety shower.

Section 9 — Physical and Chemical Properties

Appearance: Clear Slightly Yellow Liquid

pH: <1

Specific Gravity: 1.109

Solubility: 100% in Water

Boiling Range: 85 – 100°C

Flash Point: Not Available

Flammability: Not Available

Vapour Pressure: Not Available

Section 10 — Stability and Reactivity

Chemical Stability: STABLE

Incompatible Materials: Strong oxidising agents, chlorates, and nitrates. Contact with hypochlorites (e.g. chlorine bleach), sulfides, or cyanides will liberate toxic gases. Contact with alkaline materials (e.g. aqueous ammonia) will generate heat.

Conditions to Avoid: Heating above 110°C may result in exothermic decomposition with rapid release of CO₂ gas.

Hazardous Decomposition Products: Thermal decomposition may yield oxides of carbon, nitrogen, and chlorine. Hydrogen gas may be released on contact with certain metals.

Hazardous Polymerisation: Will not occur.

Section 11 — Toxicological Information

No carcinogen ratings assigned. No specific toxicity data listed for this mixture.

Routes of Entry: Inhalation, Ingestion, Skin contact, Eye contact

Section 12 — Ecological Information

No specific ecotoxicity data listed for this product.

Section 13 — Disposal Considerations

Dispose of in accordance with local, state and federal regulations.

Section 14 — Transportation Information

DOT / IMDG / IATA / TDG: Non-Regulated — this product is not regulated as a hazardous material for transport.

Section 15 — Regulatory Information

TSCA 8(b) Inventory: CAS 7732-18-5 — Water (Listed)

Section 16 — Other Information

Date Prepared: 10/31/2022

Statement of Compliance

Teak Clean is readily biodegradable and is comprised of environmentally responsible raw materials and non-hazardous chemicals. Its components meet or exceed the highest global environmental regulatory requirements and are fully compliant with the standards of MARPOL Annex III and MARPOL Annex V. Teak Clean is free from harsh and harmful chemical ingredients, making it safe to discharge into water at both full concentrate or with wash water without harming the marine environment. This product is NOT a marine pollutant.

The information herein is believed to be correct but does not claim to be all-inclusive and should be used only as a guide. Final determination of suitability of any material is the sole responsibility of the user. For proper handling and disposal, always comply with federal, state and local regulations.
← Back to DiTec Products