Manufacturer: Ditec Marine Products, LLC
W229 N2512 Duplainville Road, Waukesha, WI 53186 USA
Tel: 1 800 572 4390
Product Use: Industrial
Emergency Phone: CHEMTREC — Canada and USA: (800) 424-9300 | Acct: 1018960
Signal Word: DANGER
| GHS Rating | Category | Description |
|---|---|---|
| Flammable liquid | 3 | Flash point ≥ 23°C and ≤ 60°C (140°F) |
| Skin corrosion/irritation | 2 | Reversible adverse effects in dermal tissue |
| Germ cell mutagenicity | 1B | Known to produce heritable mutations in human germ cells |
| Carcinogenicity | 1B | Presumed Human Carcinogen, based on animal carcinogenicity |
| Specific target organ toxicity (single exposure) | 3 | Narcotic effects — Respiratory tract irritation |
| Aspiration hazard | 1 | Aspiration Toxicity Category 1: Known human evidence |
GHS Hazard Statements
Key Precautionary Statements
| Chemical Name / CAS No. | % Weight |
|---|---|
| Naphtha, petroleum, hydrotreated heavy (CAS 64742-48-9) | 90% – 100% |
| Trade Secret | 1% – 5% |
Inhalation: Remove from exposure area. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.
Eye Contact: Flush eyes with water for a minimum of 15 minutes, occasionally lifting upper and lower lids. Get medical attention promptly.
Skin Contact: Remove contaminated clothing. Wash skin with soap and water. Get medical attention. Wash clothing before reuse.
Ingestion: Do NOT induce vomiting. Give victim a glass of water. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog
Specific Hazards: Flammable liquid and vapour. Vapours may cause flash fire or explosion and can travel to ignition source and flash back. Empty containers retain residue and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose containers to heat, flame, sparks, or static electricity.
Firefighter PPE: Self-contained breathing apparatus (MSHA/NIOSH approved) and full protective gear. Use water spray to cool containers. Avoid solid water streams. Water runoff can cause environmental damage — dike and collect water used to fight fire.
Wear appropriate PPE and self-contained breathing apparatus. Eliminate all ignition sources. Do not touch or walk through spilled material. Avoid runoff into storm sewers and waterways. Ventilate spill area. Stay upwind. A vapour-suppressing foam may be used to reduce vapours. Absorb with inert material (e.g. dry sand or earth) then place in a chemical waste container. Recover by pumping using an explosion-proof pump.
Handling: Use only in a well-ventilated area. Avoid breathing vapour, fumes or mist. Avoid contact with eyes, skin, and clothing. Take precautionary measures against static discharge. Ground and bond containers when transferring material. Use spark-proof tools and explosion-proof equipment. Always open containers slowly to allow excess pressure to vent.
Storage: Store in a cool, dry, well-ventilated place. Keep container closed when not in use.
Engineering Controls: Provide ventilation sufficient to maintain exposure below recommended limits.
Respiratory: Program meeting OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever conditions warrant a respirator.
Skin Protection: Wear impervious protective gloves. Wear protective gear as needed — apron, suit, boots.
Eye Protection: Safety glasses with side shields (or goggles) and a face shield.
Other Equipment: Facility should be equipped with an eyewash facility and safety shower.
Hygiene: Do not eat, drink, or smoke in areas where this material is used. Wash thoroughly after handling.
Appearance: Clear White to Slightly Yellow Liquid
Density: 0.762
Vapour Pressure: Not Available
Vapour Density: Not Available
Flash Point: ≥ 23°C and ≤ 60°C (140°F)
Solubility: Not Available
Boiling Range: Not Available
Viscosity: Not Available
Chemical Stability: STABLE
Incompatible Materials: Avoid contact with moisture and/or water. Prevent contact with strong oxidising agents.
Conditions to Avoid: Avoid impact, friction, heat, sparks, flame and sources of ignition.
Hazardous Decomposition Products: Toxic gases/fumes during burning or thermal decomposition. May release hydrogen fluoride under fire conditions. Carbon monoxide and carbon dioxide may form during combustion.
Hazardous Polymerisation: Will not occur.
Mixture Dermal Toxicity LD50: 3,383 mg/kg
| Component (Naphtha, petroleum, hydrotreated heavy — CAS 64742-48-9) | Value |
|---|---|
| Oral LD50 | 5,000 mg/kg (Rat) |
| Dermal LD50 | 3,160 mg/kg (Rabbit) |
Routes of Entry: Inhalation, Ingestion, Skin contact, Eye contact
Carcinogen Rating: Naphtha, petroleum, hydrotreated heavy — EU REACH: Present (P)
Component Ecotoxicity (CAS 64742-48-9): 96 Hr LC50 Pimephales promelas: 2,200 mg/L
Dispose of in accordance with local, state and federal regulations.
| Mode | UN/NA Code | Proper Shipping Name | Hazard Class | Packing Group |
|---|---|---|---|---|
| DOT (Highway) | UN1993 | Combustible liquid, n.o.s. (petroleum distillates) | 3 | III |
| IMDG (Marine) | UN1268 | Petroleum Distillates, n.o.s. | 3 | III |
*Not regulated for ground shipments in the US in nonbulk packaging (<119 gallons) per 49 CFR 173.120(b)(2).
TSCA 8(b) Inventory: CAS 64742-48-9 — Naphtha, petroleum, hydrotreated heavy (Listed)
SARA 313: Contains EPCRA section 313 chemicals subject to reporting requirements under 40 CFR 372.
Date Prepared: 04/03/2025